RPM

From Erbessd Instruments
Revision as of 17:01, 8 July 2025 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Aqui puedes poner toda la informacion del sensor RPM

Device Specifications
MEASUREMENT
Parameter Value
Built-in sensor Ultra-low noise MEMS accelerometer
Sensitivity (x, y, z) 100 mV/g
Frequency range (±3 dB) 0.5 kHz – 10 kHz
Dynamic range 20 g
Resonant frequency > 25 kHz
Sample rate 48 000 Hz
ADC 24 bits
Spectral noise (10 Hz) 67 µg/√Hz
CONNECTIVITY AND SOFTWARE
Parameter Value
Wireless protocol Wi-Fi 802.11 (no receiver needed)
Device compatibility iOS devices; Wireless Universal receiver 3×; tablets; laptops
Software compatibility DigivibeMX, WISER Vibe, Wiser Balance
Operational distance 15 m line-of-sight
POWER SUPPLY
Parameter Value
Main power 2 × rechargeable Li-ion battery CR123 / 3.7 V / 800 mAh
Battery life time 6 h continuous use; enters standby after 30 s if no receiver detected
AC adapter Input 100-240 VAC / 50-60 Hz, output 5 V DC / 1 A
Connect built-in 5-pin LEMO connector (charger port / optical sensor / 4th accelerometer)
DIMENSIONS AND FIXTURE
Parameter Value
Dimensions (d × h) 99 × 48.9 mm with base / 82 × 48.9 mm without base
Resistance to shock 5000 g
Weight 425 g with magnetic base / 250 g without magnetic base
Case Water- and dust-resistant IP67
Housing material Stainless steel
Fixture Fastener 1/4-28 UNF
ENVIRONMENTAL CONDITIONS
Parameter Value
Operation temperature −20 °C to +60 °C (−4 °F to 140 °F)
Storage temperature −20 °C to +85 °C (−4 °F to 185 °F)